← All publications

Funding schemes

Bpifrance: Eureka SMART Cluster call for projects

Fund international collaborative R&D projects in advanced manufacturing.

Status
Open
Next deadline
26 January 2027 (Project Outline)
Operator
Bpifrance

At a glance

Programme
Eureka Clusters: SMART cluster
Territory
International (countries supporting the Cluster); national funding, provided in France by Bpifrance
Beneficiaries
Consortia of at least two partners, including a French company; regional aid reserved for SMEs and mid-sized companies (up to 2,000 employees)
Type of aid
Bpifrance innovation aid or unsecured loan; i-Démo above €4 million of French budget
Amount / rate
From €50,000 to €3 million below the €4 million cumulative budget threshold; rate to be confirmed with Bpifrance
Availability
Open since 1 July 2026; Project Outline by 26 January 2027; Full Project Proposal and national submission by 15 April 2027 for invited projects

Information up to date as of 6 November 2026, valid until 26 January 2027. Scheme conditions change: check with the funding body or ask us for confirmation.

Within the Eureka Clusters programme, the SMART cluster is launching an international call for projects dedicated to advanced manufacturing. Consortia bringing together at least two partners from two countries supporting the Cluster can propose collaborative R&D projects with strong commercial potential. Each country funds its successful applicants according to its own arrangements: in France, funding is provided by Bpifrance (the French public investment bank), through two separate routes depending on the participants' budget.

Which projects are funded?

Collaborative R&D projects in the field of advanced manufacturing, with strong commercial potential. The international criteria, common to all countries, set in particular:

  • a maximum duration of 36 months;
  • a budget distribution in which one partner, or a group of partners from the same country, does not exceed 66% of the project budget.

Who can apply?

  • A consortium of at least two partners: a French company and an entity from a partner country of the Cluster.
  • On the French side, the funding route depends on the cumulative budget (see below): i-Démo (a national call supporting structuring research, development and innovation projects) for French participants above €4 million, aid from the Bpifrance Regional Office for French SMEs and mid-sized companies (up to 2,000 employees) below that.
  • Foreign partners fall under their own funding body, which they must contact before submission.
  • The participation of other French players, laboratories in particular, is not addressed by the page: to be confirmed with Bpifrance.

Which costs are eligible?

  • Expenditure related to industrial research and experimental development.
  • Industrialisation and commercialisation costs are not eligible.
  • The detail of eligible expenditure items is to be confirmed with the Bpifrance account manager.

How much funding is available?

For French participants in Eureka Cluster projects, the Bpifrance page provides for two public funding programmes. The choice between the two is based on the cumulative budget:

  • More than €4 million of cumulative budget for all French participants: they can apply to i-Démo.
  • Less than €4 million of cumulative budget: French SMEs and mid-sized companies (up to 2,000 employees) can apply to their Bpifrance Regional Office for innovation aid or an unsecured loan, of €50,000 to €3 million.

The page gives neither an aid rate nor a breakdown between grant, advance or loan: to be confirmed with Bpifrance.

For project set-up, French participants can also benefit from the Diagnostic Partenariat Technologique International (international technology partnership diagnostic): a grant covering at most 50% of the fee of a private expert, with the page mentioning a maximum amount of €25,000 excl. VAT (to be confirmed: ceiling on the service or on the aid).

Main selection criteria

The page does not publish a detailed evaluation grid, to be confirmed in the Cluster guide. It highlights:

  • the project's strong commercial potential;
  • a balanced distribution of the budget between countries, with the 66% ceiling per partner or per country;
  • the content of the Project Outline: project objectives, innovation, targeted commercial impact and consortium;
  • the incorporation, in the Full Project Proposal, of the panel's feedback on the first stage.

Points to watch

  • Prior contact with your Bpifrance innovation account manager is mandatory, copying international.innoproject@bpifrance.fr: it serves to check eligibility for Bpifrance funding.
  • Submission takes place at two levels. At international level, two stages, both mandatory to be selected: Project Outline by 26 January 2027, then Full Project Proposal by 15 April 2027 for positively evaluated projects only. At national level, the funding application is submitted on Bpifrance en Ligne (Bpifrance's online portal) to your Regional Office, at the same time as the Full Project Proposal.
  • The €4 million threshold is worded in two ways on the page: cumulative budget "of all French participants" for i-Démo, "of all participants" for regional aid. Have Bpifrance confirm which budget applies.
  • For the i-Démo route, the page refers to the generic i-Démo call No. 5. This call accepts Eureka cluster projects, but its last cut-off date was set at 9 September 2026: an i-Démo route open to a national submission in April 2027 is to be confirmed.
  • The 66% ceiling per country is assessed on the budget of the whole project: to be checked as soon as the consortium is put together.

The CHOICE view

This call is aimed at French companies running an R&D project in advanced manufacturing with at least one partner from a country supporting the Cluster, and with a clear commercial objective. The 66% rule requires building a genuinely shared consortium: a project in which more than two-thirds of the budget rests on a single country, France included, falls outside the call's criteria. For CHOICE, it is necessary to secure early the Bpifrance contact, the costing of the French budget, which decides between regional aid and i-Démo, and, above €4 million, the existence of an i-Démo call open at the time of national submission. International selection remains in two stages, with no guarantee of passing to the second stage.

How to prepare your project

  • Contact your Bpifrance innovation account manager now, copying international.innoproject@bpifrance.fr.
  • Confirm the foreign partner or partners and ask them to contact their funding body.
  • Distribute the project budget so that no country exceeds 66%.
  • Cost the cumulative budget of the French participants to know which French route applies.
  • Draft the Project Outline (objectives, innovation, targeted commercial impact, consortium) for 26 January 2027.
  • Plan ahead for the Full Project Proposal and the national submission on Bpifrance en Ligne, to be carried out together for 15 April 2027.
  • To find partners, approach Bpifrance and the EEN network (Enterprise Europe Network); for project set-up, consider the Diagnostic Partenariat Technologique International.

Official sources

The conditions of a scheme can change. This fact sheet was checked on the date shown; only the call specifications, the official texts and the funding body's decision are authoritative.

How CHOICE works on this kind of application

Finding the right scheme is only one step. What matters happens before: clarifying the project, gathering the expected evidence, bringing in the right partners and sequencing commitments.