Bpifrance: Eureka XECS Cluster call for projects
Fund international collaborative R&D projects in electronic components and systems.
At a glance
- Programme
- Eureka Clusters: XECS cluster
- Territory
- International (countries supporting the Cluster); national funding, provided in France by Bpifrance
- Beneficiaries
- Consortia of at least two independent partners, including a French company; regional aid reserved for SMEs and mid-sized companies (up to 2,000 employees)
- Type of aid
- Bpifrance innovation aid or unsecured loan; i-Démo above €4 million of French budget
- Amount / rate
- From €50,000 to €3 million below the €4 million cumulative budget threshold; rate to be confirmed with Bpifrance
- Availability
- Project Outline by 21 January 2027; Full Project Proposal and national submission by 15 April 2027 for invited projects
Information up to date as of 6 November 2026, valid until 21 January 2027. Scheme conditions change: check with the funding body or ask us for confirmation.
Within the Eureka Clusters programme, the XECS cluster is launching an international call for projects in the field of electronic components and systems. It is aimed at consortia bringing together partners from at least two countries supporting the Cluster, for collaborative R&D projects with strong commercial potential. Funding is national: each country funds its successful applicants according to its own arrangements, and in France it is Bpifrance (the French public investment bank) that provides the funding.
Which projects are funded?
Collaborative R&D projects on technical innovation applied to industry, with a market orientation, in the field of electronic components and systems. The international criteria, common to all countries, require in particular:
- a civil application project;
- a volume of at least 35 "person years";
- a project well balanced between the consortium partners;
- a maximum duration of 36 months.
Who can apply?
- A consortium of at least two partners independent of each other: a French company and an entity from a partner country of the Cluster.
- It is recommended to include partners from at least three different countries.
- On the French side, the funding route depends on the cumulative budget (see below): i-Démo (a national call supporting structuring research, development and innovation projects) for French participants above €4 million, aid from the Bpifrance Regional Office for French SMEs and mid-sized companies (up to 2,000 employees) below that.
- Foreign partners fall under their own funding body, which they must contact before submission.
- The participation of other French players, laboratories in particular, is not addressed by the page: to be confirmed with Bpifrance.
Which costs are eligible?
- Expenditure related to industrial research and experimental development.
- Industrialisation and commercialisation costs are not eligible.
- The detail of eligible expenditure items is to be confirmed with the Bpifrance account manager.
How much funding is available?
The Bpifrance page provides for two public funding programmes for French participants, depending on the budget:
- Cumulative budget of all French participants above €4 million: the French participants can apply to i-Démo.
- Cumulative budget below €4 million: French SMEs and mid-sized companies (up to 2,000 employees) can apply to their Bpifrance Regional Office for innovation aid or an unsecured loan, of €50,000 to €3 million.
The aid rate and the breakdown between forms of funding are not specified: to be confirmed with Bpifrance.
For project set-up, French participants are eligible for the Diagnostic Partenariat Technologique International (international technology partnership diagnostic): a grant covering at most 50% of the fee of a private expert, with the page mentioning a maximum amount of €25,000 excl. VAT (to be confirmed: ceiling on the service or on the aid).
Main selection criteria
The page does not publish a detailed evaluation grid, to be confirmed in the Cluster guide. It highlights:
- the project's commercial potential and market orientation;
- technical innovation applied to industry;
- the balance of the project between partners;
- the content of the Project Outline: project objectives, innovation, targeted commercial impact and consortium;
- the incorporation, in the Full Project Proposal, of the panel's feedback on the first stage.
Points to watch
- Prior contact with your Bpifrance innovation account manager is mandatory, copying international.innoproject@bpifrance.fr: it serves to check eligibility for Bpifrance funding.
- Two levels of submission coexist. At international level, two mandatory stages: Project Outline by 21 January 2027, then Full Project Proposal by 15 April 2027 for positively evaluated projects only. At national level, the funding application is submitted on Bpifrance en Ligne (Bpifrance's online portal), at the same time as the Full Project Proposal.
- The €4 million threshold is worded in two ways on the page: cumulative budget "of all French participants" for i-Démo, "of all participants" for regional aid. Have Bpifrance confirm which budget applies.
- For the i-Démo route, the page refers to the generic i-Démo call No. 5. This call accepts Eureka cluster projects, but its last cut-off date was set at 9 September 2026: an i-Démo route open to a national submission in April 2027 is to be confirmed.
- Industrialisation and commercialisation costs are excluded from the eligible base.
The CHOICE view
This call suits a French industrial company that is already running, or can quickly set up, an R&D programme in electronics with at least one partner from a country supporting the Cluster, and whose project clearly targets a market. The threshold of 35 person years and the requirement for balance between partners imply a project of a certain scale, well distributed. For CHOICE, the points to secure as a priority are the Bpifrance contact before any submission, the French budget that determines the funding route, and the actual availability of an i-Démo call if that budget exceeds €4 million. International selection remains in two stages, with no guarantee of passing to the second stage.
How to prepare your project
- Contact your Bpifrance innovation account manager now, copying international.innoproject@bpifrance.fr.
- Confirm the foreign partner or partners, ideally from three countries, and ask them to contact their funding body.
- Cost the cumulative budget of the French participants to know which French route applies.
- Draft the Project Outline (objectives, innovation, targeted commercial impact, consortium) for 21 January 2027.
- Plan ahead for the Full Project Proposal and the national submission on Bpifrance en Ligne, to be carried out together for 15 April 2027.
- To find partners, approach Bpifrance and the EEN network (Enterprise Europe Network); for project set-up, consider the Diagnostic Partenariat Technologique International.
Official sources
- Bpifrance: official page of the Eureka XECS Cluster call
- Bpifrance: generic i-Démo call for projects No. 5, to which the page refers
The conditions of a scheme can change. This fact sheet was checked on the date shown; only the call specifications, the official texts and the funding body's decision are authoritative.
How CHOICE works on this kind of application
Finding the right scheme is only one step. What matters happens before: clarifying the project, gathering the expected evidence, bringing in the right partners and sequencing commitments.
- Our approach Improve and de-risk the project before financing it.
- Our services Assessment, business plan, preparing and filing the application, representation, follow-up.
- Our references More than 130 projects supported over ten years, and the firm's accreditations.
- Technical engineering + relationship engineering Also worth reading in our publications.
- All funding schemes The full catalogue, with conditions and deadlines.