← All publications

Funding schemes

ADEME: PACTE Industrie, supporting the energy transition of industry

Structure the decarbonisation of an industrial site or group through studies and coaching co-funded by ADEME.

Status
Open
Next deadline
31 December 2026
Operator
ADEME

At a glance

Programme
PACTE Industrie: support and skills pathway for the energy transition of industry (ADEME 2026 catalogue)
Territory
France and overseas territories
Beneficiaries
Industrial companies of all sizes, micro-enterprises included, regardless of company age
Type of aid
Funding for studies and coaching carried out by an approved provider, formalised in an ADEME funding contract
Amount / rate
Up to 80% of the cost of the study depending on size (80, 70 or 60% at most), calculated on a base set by ADEME
Availability
Available until 31 December 2026; application before any commitment, at least one month of review

Information up to date as of 6 November 2026, valid until 31 December 2026. Scheme conditions change: check with the funding body or ask us for confirmation.

PACTE Industrie supports manufacturers in their energy transition through tailored studies and coaching: energy mix evolution opportunities, decarbonisation strategy, low-carbon investment pathway, financing plan. ADEME (the French Agency for Ecological Transition) funds up to 80% of the cost of the study depending on company size, and the scheme is announced as available until 31 December 2026.

Which projects are funded?

The support covers energy management, low-carbon strategy and financial structuring. Each service follows specifications drawn up by ADEME and is chosen à la carte, according to the company's needs and maturity:

  • Study of energy mix evolution opportunities, at the level of an industrial site: energy efficiency, waste heat recovery, renewable energy, electrification and hydrogen, with a multi-criteria analysis and a roadmap to 2030 and 2050 (2 to 3 months).
  • ACT Pas à Pas (ACT Step by Step), at group level: development of a decarbonisation strategy and the associated transition plan (9 to 18 months).
  • Low-carbon investment pathway (TIBC), at group level: site decarbonisation scenarios, investment schedules and greenhouse gas emission reduction pathways (6 to 12 months). A combined version, "Developing your strategy and low-carbon investment pathway", is also offered.
  • ACT Évaluation (ACT Assessment): assessment of the ambition of a decarbonisation strategy and of its alignment with the goals of the Paris Agreement (2 to 3 months).
  • Financing coaching: tailored support to build the financing plan for a low-carbon or energy-saving investment project, on one or more of the five themes offered (2 to 5 days).

The programme also includes training courses and an ISO 50001 certification bonus (PRO-SMEn), which follow their own arrangements.

Who can apply?

  • Companies in the industrial sector, of all sizes, micro-enterprises included, regardless of company age, in France and the overseas territories.
  • Eligibility is checked against a list of NAF codes (the French classification of business activities) published by the programme; a company not on the list that can show industrial activity accounting for at least 25% of its turnover is invited to contact the PACTE Industrie team.
  • For group-level studies (ACT Pas à Pas, TIBC, ACT Évaluation), the head office must be in France; for site-level studies, the sites must be in France, while the head office may be abroad.
  • Sites subject to the European carbon market (EU ETS) are eligible.
  • Non-industrial companies, local authorities and hospitals are not eligible for the aid.

Each type of support has its prerequisites, according to the programme's website:

  • energy mix study: energy audit less than 4 years old, or energy review less than 3 years old for an ISO 50001-certified company; failing that, a comprehensive study combines a non-regulatory audit and an opportunity study;
  • ACT Pas à Pas: greenhouse gas emissions inventory less than two years old covering the significant sources, commitment from the highest governing body, a sponsor appointed on the board of directors, a designated coordinator, and ACT Pas à Pas training completed by a person from the company before launch;
  • TIBC: energy audit less than 4 years old (or energy review less than 3 years old), greenhouse gas emissions assessment less than 2 years old covering scopes 1 and 2, and the free TIBC e-learning course;
  • ACT Évaluation: emission reduction targets and transition plan already defined, and ACT Évaluation training completed before launch;
  • financing coaching: the training course "Financing your industry's energy and low-carbon transition", and, for coachings 1 to 3, a relevant project consistent with the company's decarbonisation roadmap.

Which costs are eligible?

The aid covers the price of the study or coaching, carried out by an engineering consultancy chosen from among the PACTE Industrie approved providers, on the basis of the specifications for that support. For each type of support, ADEME has set an eligible base, calculated on an average number of service days: a higher quote remains possible, but the aid is calculated on the base only. The bases shown by the programme are as follows:

  • study of energy mix evolution opportunities alone: €15k;
  • non-regulatory audit and opportunity study combined: €20k;
  • ACT Pas à Pas: €30k;
  • TIBC: €20k;
  • ACT Évaluation: €5k.

The base for financing coaching is not given on the page consulted: to be confirmed in ADEME's 2026 "Conditions d'éligibilité et de financement" (eligibility and funding conditions) document.

How much funding is available?

The portal announces aid of up to 80% of the cost of the study depending on company size. The programme's FAQ specifies the rates for the support services, according to European Commission criteria:

  • small enterprise (fewer than 50 employees, and turnover or balance sheet total of €10 million or less): up to 80%;
  • medium-sized enterprise (fewer than 250 employees, and turnover of €50 million or less or balance sheet total of €43 million or less): up to 70%;
  • large enterprise: up to 60%.

For linked or partner enterprises, it is the size of the upstream or controlling enterprise that counts. The pages for each type of support use a different breakdown (very small businesses: 80%, SMEs: 70%, mid-sized companies and large groups: 60%): the applicable category is to be confirmed in the 2026 eligibility and funding conditions.

If the application is accepted, ADEME sends a funding contract specifying the maximum aid amount, the conditions and the payment arrangements. For small and medium-sized enterprises, an advance of around 15% may be paid on notification, and an interim payment is provided for an operation lasting 12 months or more; the balance is paid on supporting documents at the end of the operation. PACTE Industrie aids can be combined with one another.

Outside the support services, the FAQ indicates for training courses a rate of 80% below 250 employees and 40% above, and for the ISO 50001 bonus an amount equal to 20% of the annual energy expenditure of the certified sites, up to a limit of €40,000 per company.

Main selection criteria

The sources consulted do not publish a selection grid: ADEME examines each application. At a minimum, the application must include:

  • the company's eligibility on the basis of its industrial activity;
  • the prerequisites for the support targeted;
  • an approved provider and its quote, drawn up on the basis of the specifications;
  • a project that has not started;
  • the administrative information, the project description and its technical and financial details.

Points to watch

  • Do not commit to or start any support before submitting the aid application: the project must not have started.
  • Only PACTE Industrie approved providers give entitlement to the aid; a non-approved consultancy can apply at the next opening of the approval process.
  • Allow at least one month of review between submission and signature of the agreement, the duration depending on how precise the application is.
  • The aid is calculated on the base set by ADEME, not on the quote: the difference for a higher quote remains payable by the company.
  • The scheme is announced as available until 31 December 2026; the sources consulted say nothing about a renewal in 2027.
  • PACTE Industrie does not fund feasibility studies: its energy mix opportunity study complements the energy audit and precedes the feasibility study funded by the "energy performance" or "decarbonisation" aid in industry, and the programme is reserved for industrial companies, whereas Booster Entreprises targets tertiary buildings.

The CHOICE view

PACTE Industrie suits manufacturers that want to structure their decarbonisation before investing: a site looking for its energy mix options, a group that needs to build its strategy and investment pathway, a company that has identified a project and needs to put together its financing. The bases remain modest, but the deliverables then strengthen an application for a feasibility study or investment aid, even though the programme is not a prerequisite for them. For CHOICE, three points need securing before 31 December 2026: the prerequisites for the support targeted, the choice of an approved provider, and an application with no prior commitment.

How to prepare your project

  • Identify the support suited to the company's maturity, with the PACTE Industrie team if needed.
  • Check eligibility, for example with its SIRET number (French business identifier) on the Transition écologique des entreprises portal (a French government portal), and the NAF code.
  • Gather the prerequisites: energy audit, emissions assessment, prior training depending on the case.
  • Consult ADEME's 2026 eligibility and funding conditions.
  • Choose a provider from the directory of approved providers and obtain its quote based on the specifications, without accepting it.
  • Create an ADEME account and submit the application, allowing at least one month of review.

Official sources

The conditions of a scheme can change. This fact sheet was checked on the date shown; only the call specifications, the official texts and the funding body's decision are authoritative.

How CHOICE works on this kind of application

Finding the right scheme is only one step. What matters happens before: clarifying the project, gathering the expected evidence, bringing in the right partners and sequencing commitments.